Dentrix Imaging

Instructions for Dentrix Integration

MouthWatch cameras easily integrate with Dentrix Image. Use the MouthWatch camera to capture images of the patient and store them directly into the patient record.

---

Step 1 – Download the Button Capture Software

Download MouthWatch Capture ⬇ Download MouthWatch Capture 

Important:
If setting up a MouthWatch Plus+, make sure to install the required driver by checking the box during installation.

• Once installed, right-click the MouthWatch Capture icon in the lower right corner of your screen.
• A menu will display, left-click Dentrix Ascend.

Quick Tip:
If you don’t see the MouthWatch Capture icon, click the ^ button to expand the System Tray. You can drag and drop the icon from the expanded System Tray down to your Taskbar.

---

Step 2 – Plug in the MouthWatch Camera

Make sure you plug the USB connector into a powered USB port. Sometimes these are located on the front or back of the computer. If your monitor has USB ports, these may not be powered.

Important:
If setting up a MouthWatch Plus+, use a USB 3.0 port.

---

Step 3 – Confirm MouthWatch Capture Detects the Camera

Once the camera is plugged in, the MouthWatch Capture icon should turn blue in the system tray, indicating it sees the camera.

---

Step 4 – Select Generic Intraoral Camera

In Dentrix, navigate to the imaging section, select 2D Oral/Facial Photo Images from the left side, and make sure Generic Intraoral Camera is selected as shown below.

---

Step 5 – All Set!

You are now ready to begin capturing images directly into Dentrix.

---

Need Additional Help?

If you need help with setup, our support team is happy to assist.

📧 [e-mail]
💬 Live Chat: Mon–Fri, 9am–5pm ET
📞 877-544-4342 (Mon–Fri, 9am–5pm ET)